GLS1718PF-150W
* 2× Gigabit SFP Ports
* PoE standard: IEEE 802.3af/at
* PoE power: Up to 30W (Port 1 ~ Port 16)
* PoE budget: 150W
* Switch / VLAN / Extend working mode support
* Data transmission up to 250m with Extend supported
* Rack Mountable (19 inch)
Product Description
GLS1718PF is a 16-port Gigabit digital PoE switch independently developed by Kedi Communication, providing 16 10/100/1000M adaptive RJ45 ports and 2 Gigabit SFP fiber ports. Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions. The downstream ports all support the IEEE802.3af/at standard PoE power supply function, can automatically detect and identify the power receiving equipment that meets the standard, and supply power to it through the network cable.
Prevents usage overload, the device is plug-and-play, no configuration is required, and easy to use. It can be used in the access layer of security monitoring, hotels, campuses, factory dormitories and wireless coverage of small and medium-sized enterprises.
Product model and appearance
|
GLS1718PF |
● 16*10/100/1000M RJ45 Adaptive RJ45 port (PoE power supply) ● 2*1000M RJ45 ports (15,16 ports) + 2*1000M SFP fiber ports ● Backplane Bandwidth：36Gbps ● Packet Forwarding Rate：26.78Mpps ● Support smart PoE power supply and PoE power digital tube display |
Features
● Large buffer design, high-definition video does not freeze
● Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow
● Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions
PoE Power Supply Capability
● Support IEEE 802.3af/at PoE power supply standard
● The maximum output power of a single port can reach 30W
● SmartLink power management, StepLink step-by-step start function to escort the safe and stable operation of Kedi PoE switches;
● Automatic detection and identification of standard PoE power receiving equipment, intelligent power supply, will not burn non-standard PoE power receiving equipment or ordinary equipment
● The PoE port supports a priority mechanism, when the remaining power is insufficient, the power supply of the high-priority port is guaranteed first
Product Reliability
● The host has a low power consumption design and natural heat dissipation to ensure stable operation of the product.
● High redundancy design, providing long-term stable PoE power output.
● 0~45℃ working temperature improves product stability in a wide temperature environment
Easy To Use
● Plug and play, no need to configure, simple and convenient
● Users can easily understand the working status of the equipment through the power indicator (Power), port status indicator (Link/Act), and digital tube power display
Physical Characteristics
|
Model |
GLS1718PF |
|
Downlink Ports |
16*10/100/1000M RJ45 ports |
|
Uplink ports |
2*1000M RJ45 ports (15,16 ports) + 2*1000M SFP fiber ports |
|
PoE Standard Power Supply |
IEEE 802.3at、IEEE 802.3af |
|
Total Power Supply |
250W |
|
LED Indicator |
Link / Act |
|
Transmission Mode |
IEEE802.3 full duplex flow control and backpressure half duplex flow control |
|
Backplane Bandwidth |
36Gbps |
|
Packet Forwarding Rate |
26.78Mpps |
|
MAC Address |
8K |
|
Standard Protocol |
IEEE802.3i 10 BASE-T， IEEE802.3u 100 BASE-TX IEEE802.3ab 1000 BASE-T IEEE802.3z 1000 BASE-LX IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet IEEE802.3x Flow Control IEEE802.3az EEE |
|
Power Supply |
AC 100~240V 50/60HZ |
|
Size |
440mm × 220mm × 44mm |
|
Environmental Specification |
Working Temperature: 0℃～45℃， Humidity: 10% ~ 90% Storage Temperature: - 20℃～70℃, Humidity: 5% ~ 95% |
ordering information
Product Description
|
GLS1718PF |
16*10/100/1000M RJ45 ports+ 2 *1000M SFP fiber ports |
